Analisis Penerapan Total Productive Maintenance (TPM) Dengan Metode Overall Equipment Effectiveness (OEE) Pada Mesin Press

Authors

  • Tri Ngudi Wiyatno Pelita Bangsa University
  • Adriana Anteng Anggorowati
  • Suratno Lourentius
  • Dwi Indra Prasetya

Keywords:

Efisiensi mesin, Overall Equipment Effectiveness, Total Productive Maintenance, Performance Rate, Diagram Fishbone

Abstract

Dalam penelitian ini dirumuskan masalah tentang bagaimanakah penerapan Total Productive Maintenance (TPM) pada mesin Press. Tujuan dari penelitian ini adalah untuk menganalisa penerapan TPM pada mesin Press, menganalisa faktor yang mempengaruhinya dan memberikan rekomendasi tindakan perbaikan untuk meningkatkan efisiensi mesin. Pengukuran kinerja mesin Press ini  dilakukan dengan menggunakan metode perhitungan Overall Equipment Effectiveness (OEE). OEE adalah salah satu aplikasi progam TPM dan merupakan suatu metode perhitungan nilai efisiensi kinerja suatu proses/peralatan. Dari hasil perhitungan nilai OEE, diperoleh rata-rata OEE dari bulan Juli 2024 sampai September 2024 sebesar 83,12%. dengan nilai terendah pada Performance Rate yaitu sebesar 86,83%, Selanjutnya mengidentifikasi akar permasalahan yang menyebabkan Performance rate rendah dengan menggunakan diagram Fishbone. Setelah diketahui akar permasalahannya, langkah selanjutnya menentukan tindakan perbaikan untuk meningkatkan efisiensi mesin Press tersebut.

Downloads

Download data is not yet available.

References

[1] Corder, A., 1996, Teknik Manajemen Pemeliharaan, Erlangga, Jakarta.

[2] Davis, R. K, 1995, Productivity Improvement Through TPM: The Philosophy and Aplication of Total Productive Maintenance, Englewood Cliffs: Prentice Hall Inc, Englewood Cliffs.

[3] Pujotomo, D., dan Kartha, R. S., 2017, Analisa Sistem Perawatan Komponen Bearing Buttom Roller dan V-Belt Mesin Ring Frame RY-5 pada Departemen Spinning II A (Di PT Danrilis Surakarta), Jurnal Teknik Industri Undip, Vol. 2(2), pp. 40-48.

[4] Arifianto, A., 2018, Penerapan Total Productive Maintenance (TPM) dengan Menggunakan Metode Overall Equipment Effectiveness (Studi Kasus: PT Triangle Motorindo), Program Studi Sarjana Teknik Industri Universitas Islam Indonesia, Yogyakarta.

[5] Ahuja dan Khamba, 2008, Strategies and Success Factors for Avercoming Challenges in TPM Implementation in Indian Manufacturing Industry, Journal of Quality in Maintenance Engineering, Vol. 1(14), pp. 123-147.

[6] Vorne, I., 2002, The Fast Guide to OEE, Vorne Industri Inc, Itasca.

[7] Nakajima, S., 1988, Introduction to Total Productive Maintenance, Productivity Press Inc, Portland, pp. 21.

[8] Sudrajat, A., 2011, Pedoman Praktis Manajemen Perawatan Mesin Industri” Refika Aditama, Bandung.

Downloads

Published

2026-01-07

Issue

Vol. 25 No. 1 (2026): May

Section

Artikel

License

Copyright (c) 2026 Tri Ngudi Wiyatno, Adriana Anteng Anggorowati, Suratno Lourentius, Dwi Indra Prasetya

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).


All articles published Open Access will be immediately and permanently free for everyone to read and download. We are continuously working with our author communities to select the best choice of license options, currently being defined for this journal as follows: Creative Commons Attribution-ShareAlike 4.0 International License

Creative Commons License